Click the Start Button and type cmd
Right-click the result and select Run as administrator
Type this command and press ENTER: bcdedit /set {current} safeboot minimal (ALT: bcdedit /set safeboot minimal)
Restart the computer and enter BIOS Setup
Change the SATA Operation mode to AHCI from either IDE or RAID
Save changes and exit Setup and Windows will automatically boot to Safe Mode.
Right-click the Windows Start Menu once more. Choose Command Prompt (Admin).
Type this command and press ENTER: bcdedit /deletevalue {current} safeboot (ALT: bcdedit /deletevalue safeboot)
Reboot once more and Windows will automatically start with AHCI drivers enabled.
https://www.overclock.net/forum/20-hard-drives-storage/1227636-how-change-sata-modes-after-windows-installation.html
-
This topic was modified 11 months, 1 week ago by
Voodoo.