Getting Falcon BMS SLI working

Home Forums Gaming FlightSims Falcon BMS 4.34 Getting Falcon BMS SLI working

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #342
    Voodoo
    Keymaster

    Through Nvidia Inspector: (Assign Falcon BMS to the Falcon Allied Force Profile and then change these settings)

    Number of GPUs to use on SLI render mode = SLI GPU COUNT TWO

    Nvidia predefined number of GPUs to use on SLI render mode = SLI PREDEFINED GPU COUNT TWO

    Nvidia predefined number of GPUs to use on SLI render mode on DirectX 10 = SLI PREDEFINED GPU COUNT DX10 TWO

    Nvidia predefined SLI mode = SLI PREDEFINED MODE FORCE AFR2

    Nvidia predefined SLI mode on DirectX 10 = SLI PREDEFINED MODE DX10 FORCE AFR2

    SLI rendering mode = SLI RENDERING MODE FORCE AFR2

    From the Nvidia control Panel:

    Power management mode = Prefer maximum performance

    Maximum pre-rendered frames = 2

    Vertical Sync Tear Control = Adaptive

    Note: This just gets two cards working to divide the workload. There are advantages of non SLI/Crossfire mode if you are using extracted displays on another gpu and monitor.

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.